Network Controller is a new feature which will be available with Windows Server 2016. This feature enables to manage centrally the virtual and the physical network infrastructure to automate the management, configuration monitoring and troubleshooting. After a quick overview about network controller, I’ll explain how to deploy network controller and how to connect it to Virtual Machine Manager.

Network Controller overview

The information and schemas of this section come from here.

Network Controller is a Windows Server 2016 server role which is highly available and scalable. This feature comes with two API:

  • The Southbound API enables to discover devices, detect services configuration and gather network information
  • The Northbound API enables to configure, monitor, troubleshoot and deploy new devices (by REST endpoint or a management application as VMM)

Network Controller is able to manage the following network devices or features :

  • Hyper-V VMs and virtual switches
  • Physical network switches
  • Physical network routers
  • Firewall software
  • VPN gateways (including RRaS)
  • Load Balancers

For more information about Network Controller features you can read this topic (section network controller features)

Deploy Network Controller

Requirements

  • A server (VM or not) running on Windows Server 2016 Technical Preview 3 Datacenter;
  • A valid certificate for this server (Server Authentication);

Create Security groups

First, two security groups are required:

  • The first give permissions to configure Network Controller (GG-NetControllerAdmin);
  • The second enables to configure and manage the network by using the network controller (by using REST) (GG-NetControllerRESTAdmin)

Install Network controller feature

To install network controller features, run the following commands:

1
2
3
Install-WindowsFeature -Name NetworkController –IncludeManagementTools
Install-WindowsFeature -Name Windows-Fabric –IncludeManagementTools
Restart-Computer

Once the computer has rebooted, you can open the Server Manager and check if Network Controller is present:


Configure Network Controller

To understand commands and parameters, I recommend you to read this topic.

Currently in Technical Preview 3, the network controller role doesn’t support multi-node cluster. This is why in the following configuration, only one node will be added to the cluster. First I create a node object by using New-NetworkControllerNodeObject cmdlet.

Next I configure the network controller cluster by using the Install-NetworkControllerCluster cmdlet. I specify the node object, an authentication method and the security group that will be able to manage the network controller.

Then I configure network controller by using Install-NetworkController cmdlet. I specify also the node object, the authentication method for the clients and the security group that will be able to configure and manage network from Network Controller (by using REST).

To finish, I verify if my network controller is well configured, run the following commands:

Now that network controller is set and we can connect it to Virtual Machine Manager.

Add network controller to Virtual Machine Manager

To add Network Controller to VMM, you need VMM technical Preview 3.

Open the VMM console and navigate to Fabric. Right click on Network Services and select Add Network Service. Then specify the network service name.

Next select Microsoft as Manufacturer and Microsoft Network Controller as Model.

Then select your RunAs account.

Next specify ServerURL= and the REST Endpoint address. When Network Controller will support multi-node cluster, the SouthBound API address parameter will be mandatory.

Then select the certificate and check the box to specify that certificates have been reviewed.

Next, run Scan provider and verify that information can be gathered as below.

Next select host groups for which the network controller will be available.

When the network controller is added successfully, it should be listed in network services as below.